Page 10
RAS 2000 PowerRack Windows NT Supplement
Remote Serial Port Configuration
The purpose of this section is to provide a quick start reference for configuring
the RAS 2000 in a Windows NT environment. This document is not intended as a
replacement for the spiral bound IntelliServer Configuration Guide. The IntelliS-
erver Configuration Guide should be referenced for detailed explanations of the
settings listed, as well as any settings listed as default/blank. This document
establishes quick start guidelines for the following topics.
•
IntelliServer configuration
•
Remote serial ports
•
Saving your configuration
RAS 2000 Configuration
The IntelliServer line of products can be set up in a number of different ways. For
basic setup instructions and guidelines for your particular environment, refer to
the IntelliServer Configuration Guide (chapters 9 & 10) for detailed setup. The
following configuration information should be used in troubleshooting and initial
setup as a basic guideline. Once configured with a console, proceed with the fol-
lowing.
To configure a console terminal, see the Read Me Firs document or the IntelliS-
erver Configuration Guide. For help with the menu system, see chapter 4, Using
the Menu Interface, in the IntelliServer Configuration Guide.