Computime S-210, Instruction Manual, Page: 14 / 16

The clock is
slow (or fast)
1. Mistakes in setting the
clock.
2. Power failure
Set it correctly.
Light printing
1. The ribbon cartridge is
not set correctly.
2. The cartridge has been
used for long time.
1. Set it correctly.
2. Change a new cartridge.
The printing
position is
wrong
1. Incorrect setting of day
change.
2. Improper use of the
time recorder.
1. Set it correctly.
2. Make sure to insert the card in
the card slot and remove it
properly.
The date is
incorrect Mistakes in setting the date Set it correctly.
Imperfect
printing
Improper use of the time
recorder Make sure to insert card in the
middle of card slot and remove then
properly.
7. Replacing Ribbon Cartridge
1. Open the top cover, press Column 4 to move the ribbon cartridge to center.
2. As shown in the figure below, pull the ribbon holders towards you and,
holding them steady in the position, use the handle to take out the
cartridge.
3. Correctly insert a new cartridge between the ribbon guide and the printer
head.
Push the cartridge head until it clicks into place. Turn the knob clockwise to
fasten the ribbon.
- 14 -