4.11 Adjusting printing position
Enter
+
Enter
4.10 Setting the extension time signal
Press Enter or Back to enter the program Code
25
,
Press
+
or
–
button to set the Hour.
Press Enter again to register the setting value.
Press
+
or
–
button to set the Minute.
Press Enter again to register the setting value, the 7
th
extension ringing time is set.
Doing the same as above to enter code 26, 27, 28, 29, 30 and complete the
setting of 8
th
, 9
th
, 10
th
, 11
th
, 12
th
extension ringing times.
Press
Press
Press
(Up/Down)
or Back to enter the program code
31
,
or
–
button to set the printing position <0~5>
again to register the setting value.
Higher value, printing moves upward, lower value,
printing moves downward.
4.12 Detecting front/back of cards
Press Enter or Back to enter the program code
32
.
Press
+
or
–
button to select the flashing value “0000” or “0001”,
“0000” is for closing this function, “0001” is for starting this function.
Press Enter again to register the setting value.
*The detection function operates only when you use specific time cards
(monthly pay cards) with front/back detection cut-out.
4.13 Setting the Monthly,Weekly pay period ending day
Press Enter or Back to enter the program code
33.
Press
+
or
–
button to set the card type
Press Enter again to register the setting value
Card Type
Functions
- 11 -
