- 18 -
7. The utility program can't connect with GPL-100
To check the COM port and baud rate setting.
8. Unable to turn on the device
Please check the battery.
9. When boot up the PC with GPL-100 attached, the cursor is jumping
around.
Follow the procedure below to solve the problem:
(1).Press and hold the "SEL" of GPL-100 for more than 3 seconds,
the PC should settle down.
(2).Rlease the "SEL" of GPL-100
(3).If your mouse doesn't work properly, please re-boot the PC and
then repeat step.1
(4).Open the "Device Manager" in Windows' Control Panel by selecting
Control Panel -> System -> Hardware -> Device Manager.
(5).Click on the "+" next to "Mice and other pointing devices"
(6).Click on "Microsoft Serial Mouse" or "Microsoft Serial Ball point"
(7).Check "Do not use this device" (Disable).
(8).Click "OK"
(9).Unplug GPL-100 from PC and then plug again.
Specifications
GPS Frequency: L1, 1575.42 MHz
Channels: 14 channel all in view tracking
Update rate: 1 Hz
Antenna: Built in patch antenna
Accuracy: Less than 2.5 meters CEP
Re-acquisition Time: < 1 second.
Cold Start: 35 seconds (average,under open sky)
PC Interface: USB 2.0
Protocol: NMEA 0183 v3.01 (GPGGA, GPGSA,GPGSV, GPRMC, GPVTG)
Battery: AAA * 2, non-rechargeable.
Tracking Time: Up to 12 hours
Dimension: 71 x 47 x 25 (mm)
Weight: 65g (without batteries)
Operating Temperatures: -20
o
C to +60
o
C
Storage Temperature: -55
o
C to +75
o
C
Operating Altitude: <18,000m
Summary of Contents for GPL-100
Page 1: ...GPL 100 User s Manual...
