3-6
Call Letter Identification
Use the WX-200 voice synthesizer to identify the transmitter at the end of an alert and during the
periodic voice weather announcements. Enter your station identification in the Call Letter Box. Valid
characters are A-Z and 0-9. Up to fifteen (15) characters can be entered. Additional check boxes are
provided to add the words “This is”, “Transmitter” and “Repeater” to the identification announcement.
Figure 3-10
Transfer Data
To transfer data between the WX-200 and your computer, click the [COMPUTER TRANSFER] button.
After the current configuration up loads the alert history will down load. The alert history will display in
the [WX-200 DIGITAL WEATHER RECEIVER] window. See Figure 3-11. The most recent alert will
appear in group #1 table position #1. The WX-200 memory will store information on the last forty
alerts. The display includes the Date, Time and Event Code description. Warnings are displayed in
red, watches in yellow, and test messages in white.
NOTE: WX-200 must not be in the MONITOR
mode during a data transfer.
Figure 3-11
