you engine is as warmed up as you want.
•
Gauge Warn
– Setting the warn level on the gauge will cause the gauge name and the gauge
number to flash colors, attracting your attention to the problem. If you want to change from <=,
simply click on the button and it should toggle between <=, =, >=
•
Save
– Once you are done making changes to your gauge, be sure to click on the Save button at
the top right. If you click outside of the text box it will cancel the gauge editing and not save
any changes that were made.
Move Gauge
If you would like to move the position of one of your gauges, the process is extremely easy. Simply
touch and hold the gauge you want to move, and then select the Move Gauge option. You will now
notice that a square green border appears to show you the boundraies of the gauge. You can now place
your finger on the gauge and move it to whatever location you would like. Once you lift your finger off
the screen the gauge location will be saved, so be sure to keep your finger on the screen until your
happy with the new location. It is ok to place gauges on top of or behind other gauges.
Bring To Front / Send To Back
The DataMaxx Pro dash gives you a lot of flexibility on how you would like your display to look and
feel. This means that you can have gauges that can overlay each other to some degree so we can
maximize our screen. And once we have the ability to overlay, we have to have the ability to choose
which one is on top of the other. This is done easily by placing your finger on the gauge you want to
change, and then select either Bring to Front to make it be on top of all other gauges or Send to Back to
make it behind other gauges.
Delete Gauge
If you want to delete the gauge, simply place your finger on the gauge you wish to delete and hold it
there. When the menu option appears, select Delete Gauge. Note that this does not delete the sensor
settings on your data logger but just removes that particular display from your dash page.
Creating a New Page
Your DataMaxx Dash has the ability to show an unlimited combination of sensors and we accomplish
this by having multiple pages you can swipe between. By default, your dash should have two pages,
one with a tach in the center and 4 other dial gauges and the second page should have a tach on the left
and all 8 EGT temperatures on the right. You can get between these two pages by swiping left or right
on your dash.
To add a new page place your finger anywhere on the screen and hold it there. If you were touching a
DataMaxx Pro Dash Instructions – Page 5