background image

Press Buttons 

(I+II)

 for a ½ second to make your car siren mute when arming or 

disarming your vehicle.  A car siren icon will disappear on the bottom left-hand 

corner of your CompuGLO LCD indicating that you are in 

car siren mute mode

.  

Keep in mind that your car siren will still activate for all other modes (i.e. panic, 

alarm, shock sensor) regardless of whether or not your car siren is in mute mode. 

 

When alarm mode is armed, the remote-pager security alerts will be triggered by the 

following: 

 

 

Unauthorized car door opening will activate the car siren for 30 to 60 seconds 

and the parking lights will flash for 60 seconds.  The remote-pager will be 

notified audibly and the door icon will appear in the CompuGLO LCD.  Press 

Button 

I

 for a ½ second to turn off the car siren and flashing lights.  Repeat this 

step (press Button 

I

 for a ½ second) again to disarm alarm mode. 

 

Unauthorized trunk door opening will activate the car siren for 30 to 60 seconds 
and the parking lights will flash for 60 seconds.  The remote-pager will beep 

and the trunk door icon will appear in the CompuGLO LCD.  Press Button 

I

 for 

a ½ second to turn off the car siren and flashing lights.  Repeat this step (press 

Button 

I

 for a ½ second) again to disarm alarm mode. 

 
In alarm mode, the 

starter kill function

 is activated.  This feature disengages the 

starter mechanism on your car, which prevents you from starting your car even with 

a manual key when your vehicle’s alarm mode is activated.   

 
Note: (Siren duration is 30 to 60 sec depending on the options set at the time of initial installation.)  

 
 

Dual Stage Shock Sensor  

 

The dual stage shock sensor on the CompuStar 2WSSR can detect between light 

and heavy impact to your vehicle by sensing vibration produced by differing impacts.  

Press Buttons 

(I+III) 

for 2 second to activate or deactivate the dual stage shock 

sensor.  A red-bordered indicator box labeled Shock will darken in the top left-hand 

corner of your CompuGLO LCD showing that your dual stage shock sensor is 
activated. 

    

The dual stage shock sensor will activate 30 seconds after the CompuStar alarm 

mode is armed.

  

When the dual shock sensor is engaged, the remote-pager 

security alerts will be triggered by the following: 

© 2001 Firstech, Inc.  Page 6  

Summary of Contents for 2WSSR
















Reviews: