Step 1:
Remove the AA battery from the remote.
Step 2:
Activate Valet/Programming mode by manually turning the ignition on and
off five times with car key within a 10 second period which is the technically similar
to giving the
Green
wire 12V pulse five times
.
The parking light will flash once with
successful completion of this step.
Step 3: Within a 6 second period after cycling the ignition for the 5
th
time,
Insert the batter back to the remote. The car parking lights will flash once to
confirm that the transmitter has been programmed.
Important!
Note that you can program ONLY ONE remote-pager units
(2WSSR) for a single CompuStar brain. You can program another 1 Way
remote (1WFMR900Meg).
3. Programming Options with the Remote-Pager
The features of your CompuStar 2000AS system can be changed by utilizing the
programming options with your remote-pager. Changing of these programming
options is intended be performed by your local authorized CompuStar dealer.
Step 1
: For Programming menu 1: Press Buttons
(I+II)
for 2 seconds.
For Programming menu 2: Press Buttons
(I+III)
for 2 seconds. The car
will chirp once indicating that you are in programming mode.
Step 2
: Within a 2 second period after choosing your programming menu, press
Button
IV
the number of times to go to the option number you want to
change. You will hear a chirp and see the parking lights flash each time
you press Button
IV
.
Step 3
: Wait a few seconds. You will hear a number of chirps and see a number
of parking light flashes corresponding to the option number you want to
change. If the number of chirps or flashes is not what you want, go back
to Step 1.
Step 4
: Press Button
I
for the default factory settings and your car will respond by
one chirp and one flash. Press Button
II
for the optional setting and your
car will respond by two chirps and two parking flashes.
© 2001 Firstech, Inc. Page 13
