BrandMe
Security Floor Stand
User Manual
©Compulocks Brands Inc. All Rights Reserved.
www.compulocks.com | [email protected] | +1 800-948-0344
Step 3
Prior to installing one of the Upright Extrusions (B) on
the Base (E) route extended USB cable (USB cable not
included) into the Upright Extrusion (B). Leave 9-10” of
the cable at the top of the Upright Extrusion (B).
Step 4
Install the Upright Extrusion (B) on the Base (E) using M5
x 20mm Flat Head Screws (H), tighten using T-25 Torx
L-Wrench (J).
Note!
Make sure screws in Upright Extrusion are tight.
9-10” of
cable
H
B
B
B
B
E
E
H
J
Page 3 of 10
