BrandMe
Security Floor Stand
User Manual
©Compulocks Brands Inc. All Rights Reserved.
www.compulocks.com | [email protected] | +1 800-948-0344
Graphic Panel Specifications
Maximum material thickness of .250”/6.35mm.
Option of using two pieces of .125”/3.18mm thick material
back to back.
34.75”
88.26cm
Shaded area represents
Visible Graphic Area when
panel is inserted into the
Extrusions on the Stand.
.375” or 9.53mm will be
covered by the Extrusions
on both sides of the
Graphic Panel.
Note!
The Graphic slides
into the grooves of the
Extrusions of the Stand.
6.0”
15.24cm
Step 11
Adjust tilt tension by accessing the three screws on the
back of the Top End Assembly (A). Use M5 Hex Wrench
(K) to adjust screws.
K
A
5.25”
13.33cm
Page 10 of 10
