Interfaces and Connectors
Revised May 2011
SB-A510 Rev 1.1
14
4
INTERFACES AND CONNECTORS
4.1
CM-A510 Interface Connectors (P1, P2)
The CM-A510 CoM is interfaced through two 0.6mm pitch, 140pin connectors - P1 and P2.
Please refer to the “CM-A510 reference guide” for signal descriptions.
Table 6 P1 and P2 connector data
Manufacturer
P/N of SB-A510 Connector
P/N of CM-A510 Connector
(Mating)
AMP
1-5353183-0
1-5353190-0 or CON140
4.2
DC Power Jack (J2)
Main power input connector of the SB-A510.
Table 7 12V DC input jack pinout
Pin
Signal Name
1
GND
2
GND
3
VIN12V
Table 8 J2 connector data
Manufacturer
Mfg. P/N
Astron
15-02037-R
Mating with power supply adapter 209C10020 supplied by CompuLab.
4.3
RS232 connector (P10)
The RS232 port of the CM-A510 is routed to the SB-A510 on-board RS232 ultra-mini connector
(P10). All signals are at RS232 levels.
Table 9 P10 connector pinout
Pin
Signal Name
Pin
Signal Name
1
RS232_TXD
5
NC
2
RS232_RTS
6
NC
3
RS232_RXD
7
NC
4
RS232_CTS
8
GND
Table 10 P10 connector data
Manufacturer
Mfg. P/N
Mating connector
Wieson
G3169-500001
Wieson, P/N: 4306-5000
The connector is compatible with the CABDB9UMP cable supplied by CompuLab.
All manuals and user guides at all-guides.com
