Hayetsira St. 17, Yokneam, Israel
Tel
:
+972-48-290-168
www.fit-iot.com
www.fit-iot.com
Page
4
of
14
Airtop2 owner’s manual
Quick Start Guide
Several Airtop2 models are sold “Barebone” – without RAM and storage. To install RAM and storage please consult “Installation
and Service” below.
Choosing placement for Airtop2
Please consider the following when placing Airtop2
•
Do not place Airtop2 in a small closed space having no airflow
•
Allow at least 10 cm of clearance on left, right and top for effective airflow
•
Position it standing-up and not in another orientation. This is important for the efficiency of the Natural Airflow cooling
WARNING
: Airtop2 is designed to be positioned vertically.
Operating Airtop2 in horizontal position will reduce its cooling efficiency.
Connecting Airtop2
•
Connect monitor to Airtop2 DisplayPort or HDMI connector (use the HDMI to DVI adapter if needed)
•
Connect the USB keyboard and mouse to USB2.0 connectors
•
Plug the Ethernet cable into the Ethernet connector
•
For models with WiFi/cellular: Mount WiFi antennas on the SMA connector by turning it clockwise repeatedly until the
antenna holds firm
•
Insert the DC plug into Airtop2 main DC-in jack
•
Connect the power supply to the AC cord and plug the cord into AC outlet
Airtop2 with Windows pre-installed
Upon first power-up, you will be guided through the Windows Welcome procedure which is self-explanatory. The Windows serial
number is printed on the Windows label.
Airtop2 with Linux pre-installed
Linux loads automatically on power up. Upon boot you will be guided through the Linux Mint first-boot setup procedure.
Installing an operating system on Airtop2
Please consult
http://fit-pc.com/wiki/index.php/Airtop2_Software
