CompuLab Airtop, Owner'S Manual, Page: 16 / 25

HaYetsira St. 17, Yokneam, Israel
Tel : +972-48-290-168
Fax : +972-48-325-251
www.airtop-pc.com
www.airtop-pc.com Page 16 of 25 Airtop owner’s manual
Networking
LAN
Airtop features two 10/100/1000BaseT Ethernet ports using standard RJ45 connectors. Use a standard Ethernet
cables to connect. Four additional GbE LAN ports can be installed using FM-LANE4U4 FACE Module.
Wireless Communications
WLAN & Bluetooth
Standard Airtop models ship with WLAN/Bluetooth module - Intel 7260HMW which supports 802.11ac WLAN and
BT4.0. Two antennas are included and should be screwed into the SMA connectors on the back panel.
Cellular
Airtop provides the option for cellular communication. Dedicated 3
rd
party communication modem card can be installed
in one of two mini PCI express onboard slots, while the USIM card is connected to onboard respective micro SIM slots.
Mini PCIe #1 and #2 corresponds to micro SIM slot #1 and #2 respectively as shown in
Figure 2
.
I 3 M – Integrated Interactive Information Monitor
The integrated interactive information monitor (I
3
M) is a GUI system integrated in the front panel of Airtop.
I
3
M has the following major components:
1. An OLED display
2. Navigation keys
3. Programmable micro-controller
4. Interfaces to power and temperature sensors on the motherboard
5. Serial interfaces for communication with BIOS and operating system
The user can navigate through menus between multiple screens of the I
3
M that display system information,
temperatures, power consumption and notifications.
I
3
M firmware can be upgraded.
Options
By navigating I
3
M screen the following basic information can be displayed:
- Power consumption
- Temperature (CPU/GPU)
- Airtop Part Number (PN)
- Airtop Serial Number (SN)
- MAC addresses of the LAN ports
- Additional parameters can be added by programming new I
3
M firmware