TITLE
Drawn by
Date
DRAWING NO.
Approved by
B-0111
MOUNTING INSTRUCTUONS
FOR BUMP-400900
DUAL ANTENNA (400-900 MHz)
C-44329
2/2
G.M
F.A
FEB-03-2022
CABLE GOES
THROUGH FIREWALL
FRONT
ANTENNA
RADIO
REAR
ANTENNA
INPUT CABLE
POWER DIVIDER
DUAL ANTENNA INSTALLATION
& CABLE ROUTING
STEPS:
1 - When location has been well determined, fasten the
power divider box with 2 self-tapping screws, to the vehicle frame.
2 - Clean internal bumper surface with degreaser solvent before
fixing (sticking as vertically as possible) the antenna.
3 - Route the input cable through the engine compartment
(secured with tie-wraps), through firewall and into the vehicle
to the radio, keeping them away from any moving parts.
4 - After routing cables, attach loose connectors,
supplied with the antennas.
NOTE:
- Do not connect cables to the radio until
the installation procedure is complete!
INPUT CABLE
INPUT CABLE
POWER DIVIDER
