9
External Audio Connection
7. The external audio patch cable is color-coded. Connect the green plug to
the green Audio-Out port on the 1 to 4 converter cable of VideoMate PCI
TV Tuner card and the blue plug to the “Line-In” port of your sound card.
Internal Audio Connection
8. Plug one end of the internal audio patch cable to the green internal
Audio-Out port on the VideoMate PCI TV Tuner card.
9. Plug the other end of the internal audio patch cable to the AUX-In socket on
your sound card or on the mainboard. The on-board sound usually has
AUX-In and CD-In connector. Make sure you connect to the right one. If to
CD-In, then you have to choose the audio source to be CD-In in the System
Device in Settings of ComproPVR.
Installation
10. Verify that the
power cord to your PC case is unplugged.
11. Insert VideoMate TV in an open PCI slot. Compro recommends installing
the card in the third or fourth PCI slot from AGP away from the AGP slot.
12. Before closing your PC case, plug in main power cord of the PC case. You
should see a green LED light on the PCI TV tuner card. If you don't see the
green light, please read the notes on the following page.
13. Replace the computer cover.
TV signal and FM cable
14. Connect the supplied FM antenna to the upper and your TV signal to the
lower connector. Adjust FM antenna for optimal reception.
This completes hardware installation. Please read the following notes and
proceed to install the software.