6-9
Event Setup
PTZ Control
Chapter 6: Configuration
Figure 6-11. Delete preset points
PTZ Position Reset
Here it allows you to move the camera view to the preset position. There are two reset buttons:
•
Calibrate PTZ Back to Factory Default
- Press here to calibrate Pan/Tilt position back to factory de-
fault.
•
Reset PTZ Home Position Back to Factory Default
- Press here to reset camera’s Home position back
to factory default .
Figure 6-12. Delete preset points
Patrol Mode
Patrol Ordering
After you have created preset points, you could then configure how much time the camera will stay on
each preset position when in patrol mode. To set the patrol order, check and select preset positions from
the drop-down list, and then enter the duration for each checked and selected preset position. Pres [Save]
to apply settings.
Figure 6-13. Patrol ordering
Patrol Speed
Here you can choose the PTZ camera patrol speed between fast, medium, or slow. After you have chosen
a speed setting, please press [Save] button.
Event Setup
When an event happens, a snapshot can be instantly sent to your E-mail account, FTP server, image server, or
SMS server to warn you about what’s happened. In order to properly set up the event function, you must:
1. First set up the event server based on your needs: E-mail, FTP, or Image server.
2. Once the event servers are configured, you can then go to the trigger setup page to create an event trig-
ger and the event action(s) in response.
3. In the motion detection page, click and drag on the preview image to create a detection region and
then click [Save].