Page 7 of 1
9
5.2 Rear Panel
1. PC CONTROL
TCP/IP:
This port is the link for TCP/IP control and connects to an active
Ethernet link by an RJ-45 cable.
RS232:
Connect to a PC or control system by D-Sub 9-pin cable for the
transmission of RS-232 commands.
2. HDMI INPUT:
Connect to an HDMI source device
3. AUDIO OUPUT:
The coaxial and L/R audio output to audio amplifiers or
speakers.
4. HDMI OUTPUT:
Connect to HDMI equipped TVs or monitors.
5. IR EXT:
If the front IR sensor of unit is obstructed or the unit is installed in a
closed area out of infrared line of sight, the IR RX receiver included can be
inserted into the IR EXT port at the rear to extend the IR sensor range and
enable local control of the matrix.
6. DC POWER INPUT:
Connect to 12V/2.5A DC power adapter.
