Page 10 of 1
9
1.
Select RS232 COM or TCP mode
2.
Select RS232 COM port
3.
Click to connect or disconnect PC with Matrix
4.
Select Matrix IP
5.
Connect to Matrix IP
6.
Search Matrix IP
7.
Configure Matrix IP and MAC
8.
Click to reset to the factory settings
9.
Reboot Matrix system
10.
Device information display area
11.
Click to refresh device status: include device information displayed in
10
areas and Input/output s
ettings on “Matrix” page
12.
Click to clear device information
13.
Enable or disable Beep
14.
Power on/off Matrix system
➢
Configure TCP
After action of
7
, edit form will pop-up as below:
1.
Select auto or static IP
2.
Set the Matrix IP
3.
Set the Matrix MAC
