4
6.
OPERATION CONTROLS AND FUNCTIONS
6.1
Front Panel
FAC RESET Button:
Press and hold for 5 seconds to reset the unit to
its factory defaults.
SERV.:
This slot is reserved for firmware update use only.
Note: This USB port can provide up to 500mA to connected
devices.
L/R IN:
Connect to the stereo analog output of a device such as
an audio player or PC for embedding into the HDBaseT output.
INFO Button:
A short press of this button will switch between the
available inputs. Pressing and holding this button for 2 seconds will
activate the information OSD.
VGA IN:
Connect to VGA source equipment such as a PC or
laptop.
HDCP LED:
This LED indicates the HDCP mode of the current input.
Green indicates Follow Display mode, orange indicates Follow
Source mode, off indicates HDCP is disabled.
SRC LED:
This LED indicates which source is currently selected.
Green indicates the HDMI input, orange indicates the VGA input.
PWR LED:
This LED will illuminate to indicate the unit's power and link
status. Orange indicates the unit is on and receiving power, green
indicates the unit is on, receiving power, and has successfully