26
COMMAND
Description and Parameters
SET AUTOMATION EVENT N1 UART COMMAND N2
Set the RS-232 command string to send when the specified
Automation Event is activated.
Available values for
N1
:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
N2
= {Command}
[Max 32 characters]
GET AUTOMATION EVENT N1 UART COMMAND
Show the RS-232 command string to be sent when the specified
Automation Event is activated.
Available values for
N1
:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
SET AUTOMATION EVENT N1 CEC N2
Enable or disable the specified Automation Event's CEC
response.
Available values for
N1
:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
Available values for
N2
:
ON
[Event enabled]
OFF
[Event disabled]