Page
6
①
DC 5V—DC 5V Power Input Interface
②
POWER—Power Indicator
③
STATUS—Input signal Indicator
④
HDMI OUT— HDMI output Interface of 100M signal extension
⑤
Cat5e/a OUT—TX network output port, support CAT5E or CAT6 cable
⑥
IR
-
TX—IR TX Interface
⑦
IR
-
RX—IR RX Interface
◼
Installation and Operation:
1)
Connecting Cables
•
CHE
-
HD300
HDMI extender TX HDMI INPUT connects to the signal source (like
DVD/PSS) via HDMI cable.
•
CHE
-
HD300
HDMI extender TX HDMI OUTPUT connects to the display device with
HDMI interface (like TV) via HDMI cable.
•
CHE
-
HD300
HDMI extender RX HDMI OUTPUT connects to the display device with
HDMI interface (like TV) via HDMI cable.
•
Use
Cat5e/6 network cable to connect TX Cat5e/6 OUT and RX Cat5e/6 IN.
•
Plug in IR RX cable into IR
-
RX interface on both TX and RX side.
•
Plug in IR TX cable into IR
-
TX interface on both TX and RX side.
•
Plug in 5V DC power supply into the power jack of both the RX unit and TX unit.
•
Make TX unit IR TX point to DVD, make RX unit IR TX point to TV, and fix them well.
Refer to below picture
：
2) Operation:
A. IR Control function
---
When the connection above is finished and all devices power on, users
can control the DVD at the TV side by using the DVD remote controller via the IR
-
RX cable on the
RX unit and control the TV to be turn ON/OFF at the DVD side via the IR
-
RX cable on the TX unit.
