![background image](http://html.mh-extra.com/html/composite-arf/yak-55-sp/yak-55-sp_assembly-instructions-manual_2647306005.webp)
Finally use the small sheet
metal screw (2 per servo)
and secure the horns to the
servo disc additionally.
Now assemble the linkage
between the 2 servos. Use
the supplied aluminum
clevises.
The 2 clevises on the center
servos have to be modified.
Cut one arm of each clevis
off, so that 2 clevises (one
from the front servo and one
from the rear servo) mount
with the same pin. The left
over pin and e-ring please
keep at a safe place for
eventual replacement.
A useful hint: If you cut a
little slot into the phenolic
servo tray, aside each servo,
you can feed the wires
through and the whole unit is
unmounted and removed
from the wing within sec-
onds for maintainance or
adjustments.
Now slide the whole unit
into the wing and fix it with
14 servo screws. Check the
servo arm cut out in the
bottom wing surface and re-
shape it, if necessary.
Now install the ball link into
the aileron control horns and
install the main aileron
linkage. The servo-side
clevis will NOT be mounted
with the aluminum pin, but
with the M3x12 screw and
stop nut, through both horns,
for double safety. Slide the
brass tube over the all thread
and after adjustment secure
it with CA glue.