Composite-ARF Pitts S12, Instruction Manual, Page: 17 / 18

Wing pack
Quantity Description
2 Allen bolt M6 x 50mm (to secure top wings to centre section)
1 Flying wire (8 metres)
16 Clevise (aluminium) M3
6 Allen bolt M3 x 25mm
4 Allen bolt M3 x 12mm
10 Lock nut M3
16 Nut M3
16 Threaded Extender (steel) M3
2 Flying Wire spreader (aluminium tube 8mm Ø x 180mm)
1 Wood dowel 6mm x 100mm (for spreaders)
1 Cabane Strut (right) stainless steel
1 Cabane Strut (left) stainless steel
8 Servo mounts (milled plywood) for DS8511 servos
8 Phenolic servo arms
8 Clevises (steel) M3
16 Nut M3
8 Ball Link M3
8 All thread M3 x 70mm
8 Allen bolts M3 x 16
8 Lock nut M3
32 Sheetmetal screws 2.9 x 13mm
32 Sheetmetal screws 2.9 x 1mm
16 Sheetmetal screws 2.9 x 1mm
8 Allen bolt M5 x 40 (for outer strut mounting)
Rudder Linkage pack
Quantity Description
20 Allen bolt M3 x 12
2 Allen bolt M3 x 16
6 Allen bolt M3 x 20
22 Lock Nut M3
6 Ball link M3
2 Threaded ends for pull-pull M3
10 Nut M3
1 Pull-Pull cable 3.2m
4 Crimping tubes for pull-pull cable (thick type, aluminium)
1 Rudder cable separator (milled balsa)
4 Clevises (steel) M3
1 Milled phenolic 4-servo-servo tray for (same as Yak 3.3m)
2 Large phenolic servo horns with arm (same as Yak 3.3m)
2 Large phenolic servo horns without arm (same as Yak 3.3m)
2 Small phenolic servo horns
2 All thread M3 x 45mm
2 All thread M3 x 120mm
12 Sheetmetal screw 2.9 x 13mm
8 Sheetmetal screw 2.2 x 10mm
16 Washer M3
Composite-ARF Pitts S12 techsupport@composite-arf.com
17