37
Compool Cp3830
System Options
Spa-side Remote
The Spa-side Remote allows controlling your equipment from the spa. The light in the middle
of the switch will turn on whenever the spa is on. The light will blink when the spa is being
heated.
Spa-side Heat Boost
If your Spa-side Remote has one of its buttons designated for the controlling the Heat Boost
feature, it is possible to manually activate the heater, and boost the spa temperature for a five
minute period. This feature can only be activated if the Spa-side Remote light is not blinking.
To activate the Heat Boost, press the designated button. The light will blink during the 5-minute
cycle to indicate that the spa is being heated. If you wish to turn the heater off at any time during
this 5-minute cycle, press the Heat Boost button again. The light will stop blinking to indicate
that the spa is no longer being heated.
Telephone Module
The Telephone Module can control your equipment from inside your home or by calling your
home from a remote location.
The Telephone Module is most often setup to control the spa, however if the home is a vacation
home, you may want to configure it to turn on your pool heater instead. See Configuration
Switches for details.
To turn the spa ON or OFF, follow this command:
Press ‘772’ or ‘SPA’. 2 confirming beeps indicated spa is on, 3 confirming beeps indicate
spa is off.
To turn the pool heater ON or OFF, follow this command:
Press ‘487’ or ‘HTR’. 2 confirming beeps indicated pool heating is enabled, 3 confirming
beeps indicate pool heating is off.
Controlling the Telephone Module from outside the home uses the same procedure as described
above. The Telephone Module will answer the phone after 30 seconds if no other device
answers the phone first. If another device answers the phone first, like an answering machine
or fax machine, the Telephone Module will listen for the commands.
