INSTALLATION INSTRUCTIONS
Telescope
Use 4-40 x 3/4” Machine Screws and 4-40 Nyloc Nuts
to attach one side of the plastic ring to the Bracket
with welded washer.
Place the Base of the Telescope under the lip of the
plastic ring and attach the other half of the plastic ring.
Plastic Ring
Halves
Bracket with welded washer
(Push 1-3/8” Plugs into both ends)
Telescope Base
Assemble Telescope as shown above.
Then attach the Bracket to the Barrier
with Panel Clamps, 3/8” x 2” Carriage
Bolts and Hex Nuts.
©2003 Swings & Things Inc.
Using a small phillips head screw driver
and a 1/4” socket.
