background image

Residential Products 

Limited Lifetime Warranty 

 

Component Playgrounds works to build heavy duty products that will stand up to the heavy use of active children. 
You can trust Component Playgrounds because of the way we design and build our products. We make products 
that are simple to own, and easy to maintain. This adds up to the best value on playground products that you can 
count on, and that kids will play on time after time. 

Component Playgrounds warrants to the original purchaser/property owner that its’ residential grade products are 
free from defect in materials and workmanship.  This warranty is non-transferrable and will be honored only after 
proper registration. 

This warranty is not extended to cosmetic items such as scratches, dents, fading, discoloring, paint wear, rust, 
weathering, or decorations.  The warranty as stated is valid only if equipment is properly installed as detailed in 
the installation instructions provided.   All parts are subject to normal wear for the purpose of which they  were 
designed. 

When attached to the structure, plastic slides should not be lifted up from the bottom for any reason.   Cracks at 
the top of the slide that result from lifting the bottom of the slide will not be covered under the terms of this 
warranty. 
 

This warranty is void should the equipment be subject to vandalism, misuse, neglect, abuse, improper installation, 
tampering, or accident.  This equipment is not to be altered, or modified, by anyone other than Component 
Playgrounds or its authorized agent.  This warranty does not cover damage resulting from flood, fire, catastrophe 
or other acts of nature.  

To the extent permitted by law, Component Playgrounds shall not be liable for any direct, indirect, special, 
incidental, or consequential damages. 

Should it be found that your product has parts that are defective within the warranty period, contact Component 
Playgrounds for a warranty return authorization number.  

Unauthorized returns will be refused and returned to 

sender

.  Defective part(s) must be photographed from a minimum of three different angles that clearly show the 

problem, and the installation of the defective part by its self and in relation to the rest of the structure.  After 
obtaining a return authorization number: Return parts, freight prepaid, to the Component Playgrounds’ plant with 
proof of purchase for repair or replacement.  Component Playgrounds will evaluate the part(s) and the 
photographs and decide if the part(s) in question should be repaired or replaced.  This warranty does not cover 
costs related to removal, transportation and/or labor. 

This equipment is rated as commercial grade for residential use and is intended to be used in a private residential 
environment.  This equipment may not meet all of the safety guidelines as described by the CPSC as it relates to 
public use/commercial playground equipment.  For more information on public or commercial playgrounds, please 
visit www.cpsc.gov. 

Component Playgrounds sales representatives or its agents are not authorized to modify or substitute claims which 
are not part of this exclusive written warranty.  This warranty is void if the product is in any way modified from its 
original state, or if it is used for purposes other than the purpose for which it was intended. 

Summary of Contents for PH35-10
























Reviews: