3.c. Position parts as shown below and insert assembly into ladder. Use the mark previously made on
the top rail to show you how far the assembly needs to be inserted. Insert set screws into the ladder
top sleeve and tighten until barely snug. Do not secure them at this point.
**Notice Ladder rungs
are facing down.
3.d. Using two strong adults lift the ladder and the A Frame end and allow the ladder to fall into its hole. You can
allow the structure to stand it will not be level at this time.
Situate the ladder and “A” frame legs as desired in the space. Be certain that the top rail has not slid away from
its correct position. If it has moved, hold onto the ladder and adjust its position on the top rail by pulling or
pushing as necessary. When you are content with the position of the top rail within the top sleeve, secure the set
screws in the top sleeve.
**Notice Top rail
should be flush
with end of ladder
top sleeve.
Summary of Contents for PH30 Swing Set
Page 25: ......
