**Important Notice! Please read and understand prior to proceeding**
Pre-Assembly: Assembling the Club House Floor Joists
2.a. Locate the Floor Joist End with the four holes in it as shown below and determine which holes you will be
using for your particular swing set configuration. This is the end that will bolt to the vertical ladder.
18”
After configuring your swing
set, plug unused holes with
1/2
”
plugs provided.
Assemble and fasten with set screws facing
the inside as shown
2.b. Assemble the Deck Floor Joist structure as shown below using (8) set screws. Make sure that the set screw
holes are facing inward as shown.
Determine which holes you will be using by identifying the configuration
below that most closely resembles the configuration you wish to acheive.
OR
