5
Section 2
Getting Started
This section contains information for the unpacking, inspection, preparation for use and storage of your Compliance
West product.
Unpacking and Inspection
Your Tester is shipped in a special protective container that should prevent damage to the instrument during shipping.
Check the shipping order against the contents of the container and report any damage or short shipment to Compliance
West USA. Please save the shipping carton and packing material for the carrier’s inspection. Our customer support
department will assist you in the repair or replacement of your instrument. Please do not return your product without
first notifying us and receiving an RMA (return material authorization) number. To receive an RMA number, please
contact our customer support department at (1-800-748-6224).
Product Package for MegaPulse 1.2x50/8x20-2PF-HR Tester
Description
Part Number
MegaPulse
1.2x50/8x20-2PF-HR 2/12Ω
MegaPulse Tester
00-MP1.2x50-8x20-2PF HR
User Manual
Manual (Qty 1)
High Voltage Test Lead, Red
HVLR (Qty 2)
High Voltage Test Lead, Black
HVLB (Qty 2)
18 AWG AC Power Cord
70-101
Returning the Instrument
When it’s necessary to return the instrument for servicing or calibration, repackage the instrument in its original
container, please include all accessories and test leads. Indicate the nature of the problem or type of service needed.
Also, please mark the container as “FRAGILE” to insure proper handling.
If you do not have the original packaging materials, please follow these guidelines:
•
Wrap the instrument in a bubble pack or similar foam including all the included cables.
•
Use a strong double-wall container that is made for shipping instrumentation.
•
Use a layer of shock absorbing material 70 to 100mm (3 to 4 inch) thick around all sides of the instrument. Protect
the control panel with cardboard.
•
Seal the container securely.
•
Mark the container as “FRAGILE” to insure proper handling.
•
Please contact Compliance West USA (1-800-748-6224) to inform about the service for your instrument.
AC Line Voltage Requirements
AC line voltage requirements for your Tester are noted on the rear panel of the instrument. Do not connect the
instrument to a different voltage source. The cord packaged with your MegaPulse Tester is for use in the United
States. If another power cord must be used, the cord must be rated for the maximum current noted on the rear panel.
It must also meet the requirements of IEC 227 or IEC 245, and mains cords that are certified or approved by any
recognized national test house are regarded as meeting this requirement.
