3
EnhanceAir™ PRO Kit
Instructions
EnhanceAir™ PRO Kit Parts
Your EnhanceAir™ PRO Kit includes one or more of the following, depending on
whether you purchased the EnhanceAir™ PRO 1 or EnhanceAir™ PRO 2 kit.
EnhanceAir™ PRO 1 Kit:
1x..EnhanceAir™ PRO 30 lpm Air pump (A)
1x...............12” Air Diffuser & Baseplate (B)
1x.........20’ of 3/8” Self-weighted Airline (C)
1x......................Brass 3/8” Insert Fitting (D)
1x............2” Length of 3/8” Vinyl Tubing (E)
EnhanceAir™ 2 Kit:
1x..EnhanceAir™ PRO 60 lpm Air pump (G)
2x...............12” Air Diffuser & Baseplate (B)
2x.........20’ of 3/8” Self-weighted Airline (C)
1x......................Brass 3/8” Insert Fitting (D)
1x............2” Length of 3/8” Vinyl Tubing (E)
1x............Manifold and Valve Assembly (F)
A.
B.
C.
G.
F.
EnhanceAir™ PRO 1 Kit Assembly
Below are step-by-step instructions for assembling your EnhanceAir™ PRO 1 Kit:
(EnhanceAir™ PRO 2 on next page)
EnhanceAir™ PRO 1 Kit:
Step 1:
Thread the Brass Connector (D)
onto the pump’s air discharge port. Lightly
tighten with a wrench. Do Not over-tighten.
Step 2:
Un-roll the Self-weighted Airline and
push one end onto the Brass Connector.
Step 3:
Push the other end of the Self-
weighted Airline onto the barbed connector
on the Air Diffuser (B).
Step 4:
Place the Pump at the edge of the
pond and the Diffuser Assembly into the pond
at desired location. See page 4 for placement
guidelines.
Step 1
Step 3
Step 2
to diffuser
to diffuser
to pump
D.
E.
