manualshive.com logo in svg

Compex Wireless USA, User Manual

Share
Download
Compex Wireless USA User Manual Download Page 42

8.  TR O U B LE S H O OTI N G

ELECTRODE FAULT

The remote control displays the symbol of an electrode and a disconnected module and an arrow flashes on the 
channel in question (in this case, channel 1)�

•  Ensure that the electrodes are properly connected to the module.
•  Check to see if electrodes are old, worn and/or if contact is poor: try using new electrodes.

MODULE OUT OF RANGE

The remote control displays the out of range symbol and an arrow flashing on the channel where the problem 
was detected (in this case, channel 1)�

•  Check to make sure that the module and the remote control are less than 7’ (~2 meters) away from each    
 other.
•  Make sure you are not in an isolated area with no obstacle to reflect the signal from the remote control.
•  Make sure you are in an area that enables the signal to be reflected from the remote control.

ENGL

ISH

41

IFU_WIRELESS_2.indd   41

6/10/15   10:45 AM

Summary of Contents for Wireless USA




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands