manualshive.com logo in svg

Compex SGX3226, User Manual

Share
Download
Compex SGX3226 User Manual Download Page 76

Chapter 8 

Using SYSTEM TOOLS Menu 

 

 

66 

2.

 

Select 

Save

 button and go 

to your preferred folder to 
save this file. Do 
remember the location 
that you intend to save 
this file. Click 

OK

 button 

to proceed the 
transaction. 

 

 
 
 
 

 

3.

 

After downloading 
process has completed, 
the following message 
will appear. Click 

Close

 

button if you do not want 
to view the downloaded 
file. 

 

 

 
 
 

8.7.3

 

Restore 

 

1.

 

Click 

Browse

 button and select the file that you had saved previously 

in order to allow the system to restore back the configuration. 

 

2.

 

Click on the 

Restore

 button to start the process. 

 

3.

 

The system will request you to reboot Compex SGX3226. Click 

Yes

 

button to restart the switch. 

 

4.

 

Wait for 60 seconds and the system will automatically return to the 
Login Web page, prompting you to enter password again. 

 
 
 
 
 
 

Summary of Contents for SGX3226



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands