Chapter 4
Let’s Get Going – Software Setup
21
Part 3 (a) : Getting Ready to go Online!
Completing your general LAN Setup
1. The
DHCP Start IP Address
and the
DHCP End IP Address
has been pre-
configured from 192.168.168.100 to 192.168.168.254 (You may select any number
from 2 to 254).
2. Next, we shall move on to
configure the router to handle IP
addressing. Click on
LAN Setup
under
CONFIGURATION
.
You will note that
192.168.168.1
is the
default IP address assigned to the
router, with a
Network Mask
of
255.255.255.0. You may leave them as
they are. (The router’s subnet is
192.168.168.0)
3. For
DHCP Gateway IP address
,
set it as 192.168.168.1 unless
you have another device you
like to use as the router for
your clients.
4. Leave
the
Always use these
DNS servers
unchecked, unless
you wish to access certain
specific DNS servers only. You
may leave the
Primary DNS IP
Address
and
Secondary DNS
IP Address
as blank. If the
Always use these DNS servers
is set to be enabled, the user
has to input the
Primary DNS IP
Address
.
5. Please remember to click
Reboot Router
under
SYSTEM
TOOLS
and hit the
Reboot
button to let the settings take
effect.
a
Technology
Primer
Learn more from our
DHCP
Summary of Contents for NetPassage 28G Hotspot
Page 1: ......
