Chapter 3
Configuring Compex NetPassage 16A
47
3.3.3
Defining Virtual Server based on Port Forwarding
To define Virtual Server based on Port Forwarding:
1. Click on the
NAT
from the Command Menu and the NAT configuration
page will be displayed, as shown in Figure 3.3c.
2. Press
the
Port Forwarding
button and the list of defined Virtual Server
will be displayed, as shown in Figure 3.3e.
Figure 3.3e
Table Showing Defined Virtual Server based on Port Forwarding
3. Press
the
Add
button to define new Virtual Server as shown below.
Figure 3.3f
Defining New Virtual Server based on Port Forwarding
4. For
Known Server
, select the
Server Type
from the drop down menu and
specify the private IP address of your Virtual Server.
5. For
Custom Server
, specify the IP address of the Virtual Server, select
the
Protocol
used by this application from the drop down menu, specify
the TCP/UDP port used by this application, and enter your preferred
reference name in the
Server Type
field.
6. Press
the
Add
button to add this new Virtual Server into the list.
