Compex NetPassage 16A, User Manual, Page: 29 / 105

Chapter 2 Getting Started
20
4. The Properties Window for the selected communication port will then be
displayed, as shown below. Configure the selected communication port
with the following settings and press the
OK button to proceed.
Figure 2.4f Configuring Communication Port
5. Once the Properties Window is closed, hit the <ENTER> key once for the
login prompt to appear. Type in “password” (default password) and press
the <ENTER> key to login to the console.
Figure 2.4g Command Console Login
NOTE
Please refer to Appendix A for the list of commands available at the
console.