Pro Timer
BT
Battery Installation
Power ON/OFF
The ProTimer BT operates using a 9 volt battery for
power. It is important to use Alkaline or Lithium
batteries (not carbon) due to the power demand of the
buzzer and display backlighting.
Install the battery in the compartment on the rear of the
unit. Once installed, the ProTimer BT will briefly display
a sign-on message, followed by the home screen.
Note:
If at any time you suspect the unit is not
functioning properly, try resetting it (see page # 14).
To turn the unit
ON
, press the
SET DECR/ON
button.
After 10 minutes of inactivity, the ProTimer BT will turn
off automatically.
You may also turn it
OFF
by pressing the
MENU
REV/OFF
button for approximately 3 seconds.
1
