COMPCOOLER, PERSONAL THERMAL TECHNOLOGY
7
Operation Processes
Preparation and Unit Checking
1.
Battery Charging
Full Charge of battery, LED light of charger change from RED to GREEN
TIPS: press “Remaining Battery Capacity” on battery,
3 Led lights mean 80-100%, 2 lights mean 60-80%, 1 light means 50% less.
2.
Bladder Connection:
Filling water into Roll-Top, connect the bladder Outlet/Inlet with
backpack unit.
Checking: bladder no leaks, quick fittings connection is fine,
3.
Vest Connection:
Connect backpack unit with cooling vest, once you hear a click, it
’
s in position.
Checking: Vest no leaks, quick fittings connection is fine.
4.
Start circulation:
Press On/Off switch, Pump circulates water from bladder into micro tubing cooling
channels of cooling vest, then flow back to bladder. User may see the water flow back to
bladder from Inlet fitting.
Checking: Battery works fine, pump works fine.
5.
Bladder Freeze:
Step I- Freeze Bladder: Fill water into ROLL TOP. Water must be below FILL LINE to
create an air packet.
Step II-After bladder is frozen, fill small amount
circulation water into the roll top.
Step III-Connect ICE bladder to cooling unit, Outlet
and Inlet.
Step IV-Start circulation with ON/OFF switch or
Temp controller.
