6
Chapter 2 - Getting Started
What You Will Need To Get Started
Before connecting the MicroRouter 1220i, please check the list below
to make sure that you have received all of the items that are supplied
with the MicroRouter 1220i package.
You should also make sure you have any additional items that are
necessary to connect the router to your network.
Supplied with the MicroRouter 1220i
Please check your shipping package for the following items:
•
MicroRouter 1220i unit
•
Wall-mount power supply
•
One DB-25 to DB-25 data and auxiliary interface cable
•
CD-ROM including:
"CompatiView software
"Operating software
"HTML versions of product documentation (which can be viewed
with your favorite web browser)
•
CompatiView Management Software Reference Guide
•
Text-Based Configuration and Command Line Management Refer-
ence Guide
•
Warranty registration card
Needed For Installation
Before connecting the MicroRouter 1220i to your network, you need to
make sure that you have the necessary equipment for connecting to the
local Ethernets and the wide area transmission device(s) (modem, 56K
CSU/DSU, ISDN terminal adapter, T1 CSU/DSU).
Ethernet Connection Requirements
The MicroRouter 1220i’s Ethernet interfaces directly support 10BaseT
twisted-pair Ethernet. Other Ethernet cabling types (such as thin
Ethernet, thick Ethernet, fiber optic cabling or pre-10BaseT
twisted-pair) can be supported using a 10BaseT mini-hub or other
conversion device.
