Compass RALLYE, Owner'S Handbook Manual

Page: 30 / 134

6-9
GETTING STARTED
Instructions for Pump Storage when
not in use
Pump hose can be inserted into groove on
plug to keep pump off ground while refilling
water container (Fig. 8). The plug should
always be removed before moving the
caravan.
When removing plug:
Step 1 - Lift the lid to
unlock the
plug
Step 2 - Pull out plug
from socket
using hand
grip
Step 3 - Shut lid
Maintenance
The Watermaster IC control unit (located on
the back of the socket) is designed to be
service free and does not contain serviceable
parts. Please note that the unit is enclosed to
protect the electronics, opening the unit will
result in damage, and will invalidate warranty.
A planned maintenance schedule of regular
inspection is recommended, for the
Watermaster pump kit and socket replacing
components as necessary. Replacement
components are available in service kits from
dealers.
For information on replacement parts and
service kits, please visit
www.whalepumps.com.
Fig 8
Helpful Hints
Note : If at any stage the user experiences
less than optimum performance from the
Whale Watermaster IC, recalibrate the
system as per steps outlined above.
To obtain efficient running and maximum
pump life, ensure the following:
•
There is sufficient water in the container.
•
Maximum pumping period is not more
than 15 minutes.
•
All hose connections are firm and water
tight
•
When replenishing the water supply, it is
possible to create an air lock in the
pump. As a result, the pump will run
noisily and give no discharge. To remedy,
unplug from the socket while keeping the
pump submerged to dislodge the air
pocket in the pump. Also shaking the
dual hose gently may dislodge the air
pocket in the pump, or switch off pump at
main panel, open a tap outlet and switch
pump on again at the main panel.