Compass RALLYE, Owner'S Handbook Manual

Page: 26 / 134

6-5
GETTING STARTED
•
Abnormal combustion at the burner(s) of a
gas appliance (flames too high or too low)
•
Smell of gas
•
Outbreak of fire
A planned maintenance schedule of regular
inspection is recommended, replacing
components as necessary.
We recommend the gas regulator unit be
replaced every 10 years from the date of
manufacture.
Instructions for use
The two inlets of the regulator are to be
connected by means of two high pressure
hoses complying with the specfications of
Standard EN1949.
Putting into <<service>> Figure 1.
•
After having checked that the indicator
remains green in the two positions of the
knob, turn the knob so that the arrow is
facing to the right or the left. The arrow
on the knob will indicate the cylinder in
<<service>> use.
Operation of the <<reserve>> Figure 2.
•
The indicator is red which means that the
cylinder in <<service>> has run out. It is
now empty and the installation is
operating on the <<reserve>> cylinder.
Replacing the empty cylinder, Figure 3.
•
Turn the knob halfway. The cylinder that
was previously in <<reserve>> will
become the cylinder in <<service>> the
indicator will turn green as usual. If it
stays red, this means the system has
been operating on the <<reserve>>
cylinder for too long and that this one is
also empty. It will therefore be necessary
to change both cylinders.
•
Close the tap on the empty cylinder.
Disconnect the cylinder.
•
Connect the full cylinder. Check that the
connections are properly closed and that
there is no leakage by using leak
detection fluid. The indicator must stay
green.
After carrying out a check, reposition the
arrow on the cylinder previously in use in
order to empty it. The new cylinder is now the
<<reserve>> cylinder for the system.