Compass Avantgarde 2019 Handbook Download

Page: 11 / 104

3-2

PREPARING FOR THE ROAD

(xv)

Ensure all tables have been stored in
their designated table storage position.

(xvi)

Ensure you remove all items from the
microwave (if fitted) before towing.

(xvii) Check all the road lights are

operational.

Pulling Off

•

Pull away smoothly.

•

Avoid wear and tear on clutch and
transmission by taking extra care.

•

Change gears smoothly.

•

Try not to jerk the clutch.

Bicycle Racks

Fitting a bicycle rack to the rear panel of a
campervan will affect how weight is
distributed. There are restraints to be aware
of with such fitments.

The maximum loading allowed on the back
panel is 35 kgs including the weight of the
bike rack and bicycles.

The campervan must also be balanced to
take into account the new weight distribution.
Weight must be distributed evenly.

Elddis cannot be held responsible for
problems related to a bicycle rack fitted by a
third party.

Summary of Contents for Avantgarde 2019









































































































Search results

Summary of Contents for Avantgarde 2019

Reviews:

Related manuals for Avantgarde 2019

Brands by name

Popular brands

Compass Avantgarde 2019, Handbook

Search results

Summary of Contents for Avantgarde 2019

Reviews:

Related manuals for Avantgarde 2019

Brands by name

Popular brands