25
E
item 07 272
Nozzle cleaning
Regular nozzle cleaning is important
for proper machine operation.
The nozzle must be cleaned regular intervals
using the supplied cleaning needle.
Filter cleaning
If the filter is dirty, it needs to be cleaned.
Disconnect the water inlet hose and unscrew the filter. Remove the center of the filter from the inside and
thoroughly clean it. Replace the filter and install it back on a high pressure cleaner.
SAFETY INSTRUCTIONS FOR USE
Service
This product is not intended for children and persons with reduced physical, sensory or mental capabilities, or
persons with limited experience and knowledge, unless supervised or instructed to use this product with the
person responsible for their safety.
Use caution when using the product near children. Always place the product out of reach. Children must be
supervised to ensure that they do not play with the product.
Never allow children or persons unfamiliar with this operating instructions to operate the device. Local regu-
lations may set a minimum age for the user. The user is responsible for damage caused to third parties in the
working area of the machine as a result of its use.
Do not use the machine, if you are tired, under the influence of alcohol or drugs.
Use personal protective equipment (gloves, workshoes, eye protection, respirators, etc.) if necessary.
Secure free clothing, long hair or jewelry so that they cannot be caught in moving parts of the machine.
Intended use
This tool should be used for DIY work and should not be considered as professional tool. Do not use the pro-
duct for purposes other than those for which it is intended.
Storage
Store the machine in a dry place well away from heat sources or hazardous vapors.
Do not place any other items on the machine. Store at temperatures below 5°C.
Instructions for use
!
Turn the machine on and operate as instructed in the operating instructions carefully.
!
Before performing any inspection, maintenance, or repairs, unplug the power cord from the socket. Only
use tools in good working order for tasks for which they are intended.
!
Only work with good visibility or provide sufficient artificial lighting.
!
Make sure you maintain a firm and stable attitude while working. Keep in mind that falls are one of most com-
mon causes of accidents.
