With Rudder Stick in middle position, set the Rudder Servo Arm at 90° to the Tail Control Link. Set the Tail
Blades to 7° Pitch.
90
°
7
°
Use this Hole for Tail Link Ball
Aileron Check
Mod 1
Mod 2
Swashplate Reaction
Tilt Left
Elevator Check
Tilt
For ward
Tilt Right
Tilt Backward
Rudder Check
Tail Pitch Plate
Slide left
Slide Right
Pitch Check
Swash Plate
Ascent
Descent
00
10
20
30
40
00
9
Servo Direction Check
Turn the Transmitter on, your position has to be right behind the helicopters Tail. Make sure that the Swashplate
Mode is set to CCPM 120°. Move the Sticks according to the drawings and check the reaction of the Swashplate
and the Tail Pitch Plate. Check as well your Throttle settings. Adjust your Transmitter settings accordingly.
13mm
E
