struct el_softc *sc = el_softc[unit];
struct ifnet *ifp = &sc->is_if;
1
Declares as an argument a pointer to a
bus
data structure and a
controller
data structure for this controller. The
controller
data
structure contains such information as the controller type, the controller
name, and the current status of the controller. This completely identifies
the adapter that is being unattached.
2
Declares a
unit
variable and initializes it to the controller number for
this controller. This controller number identifies the specific 3Com
3C5x9 controller that is being unattached. The controller number is
contained in the
ctlr_num
member of the
controller
data structure
for this device.
7.2 Verifying That the Interface Has Shut Down
The following code verifies that the interface is down. Make sure that other
errors returned by
if_detach
do not stop interface shutdown.
status = if_detach(ifp);
1
if (status == EBUSY)
2
return(status);
else if (status == ESUCCESS)
3
detachpfilter(sc->is_ed);
ifp->if_flags &= ~IFF_RUNNING;
4
1
Calls
if_detach
to remove this interface from the list of active
interfaces.
2
If the interface is still in use, it cannot be detached, so failure is
returned.
3
If the interface is not in use, detaches it from the list of those that the
packet filter monitors.
4
Marks the interface as no longer running.
7.3 Obtaining the Simple Lock and Shutting Down the
Device
The following code shows how the
el_unattach( )
routine obtains the
simple lock, shuts down the device, and releases the simple lock:
s = splimp();
1
simple_lock(&sc->el_softc_lock);
2
el_shutdown(sc);
3
simple_unlock(&sc->el_softc_lock);
4
splx(s);
5
1
Calls the
splimp( )
routine to mask all LAN hardware interrupts.
Upon successful completion,
splimp( )
stores an integer value in the
7–2 Implementing the unattach Routine
