Sw
Function
Position
Status
===========================================================================
S1
VIDEO DISABLE
OFF *
ENABLED
This switch is ignored and the integrated
ON
DISABLED
video is disabled if ROM detects an
optional video board installed.
---------------------------------------------------------------------------
S2
CONFIGURATION LOCK
OFF *
DISABLED
System configuration cannot be changed when
ON
ENABLED
this switch is on (enabled).
---------------------------------------------------------------------------
S3
RESERVED
OFF *
---------------------------------------------------------------------------
S4
DISKETTE BOOT ENABLE
OFF *
DISABLED
System can be booted from diskette drive no
ON
ENABLED
matter what Configuration reads when this
switch is on (enabled).
---------------------------------------------------------------------------
S5
POWER-ON PASSWORD DEFEAT
OFF *
DISABLED
Password is set in configuration.
ON
ENABLED
---------------------------------------------------------------------------
S6
NV RAM
OFF *
DISABLED
Invalidates nonvolatile RAM and configuration
ON
ENABLED
is cleared when this switch is on (enabled).
---------------------------------------------------------------------------
*
Default
===========================================================================
SCSI Devices
The 32-Bit Fast-SCSI-2 Controller requires that a SCSI ID be set for each
SCSI device.
The SCSI ID is set by jumpers ID2, ID1, and ID0 located on
each SCSI device.
Table 3 shows the jumper settings for each SCSI ID and
its recommended drive bay.
Table 3. Jumper Settings For SCSI ID
===========================================================================
Pin 3
Pin 2
Pin 1
SCSI ID
Device in Drive Bay
ID2
ID1
ID0
===========================================================================
N/A
7
N/A
N/A
N/A
6
6
ON
ON
OFF
5
5
ON
OFF
ON
4
4
ON
OFF
OFF
3
3
OFF
ON
ON
2
2
OFF
ON
OFF
1
1
OFF
OFF
ON
0
0
OFF
OFF
OFF
---------------------------------------------------------------------------
IMPORTANT: No two drives can have the same SCSI ID.
===========================================================================
