Compaq Presario CQ35 Maintenance And Service Manual Download Page 101

Page: 101 / 135

Maintenance and Service Guide

7–1

Screw listing

This section provides specification and reference information for the screws used in the computer. The screws
listed in this section are available in the Screw Kit, spare part number 531815-001.

Phillips PM2.5×6.0 captive screw

Where used:

Three captive screws that secure the hard drive cover to the computer (screws are secured on the hard drive cover

by C-clips)

One captive screw that secures the wireless module compartment cover to the computer (screw is secured on the

wireless module compartment cover by a C-clip)

Color

Quantity

Length Thread Head

diameter

Black

6.0 mm

2.5 mm

5.0 mm

Summary of Contents for Presario CQ35








































































































































Search results

Summary of Contents for Presario CQ35

Reviews:

Related manuals for Presario CQ35

Brands by name

Popular brands

Compaq Presario CQ35, Maintenance And Service Manual

Search results

Summary of Contents for Presario CQ35

Reviews:

Related manuals for Presario CQ35

Brands by name

Popular brands