manualshive.com logo in svg

Compaq Presario 3500 Series, Maintenance & Service Manual

Share
Download
Compaq Presario 3500 Series Maintenance & Service Manual Download Page 35

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series

United States     December 9, 2002 

 

Maintenance & Service Guide

Presario 3500 Series Personal Computers

MSG Index

 | 

Home

  |   

Preface

    |   

Product Description

   |   

Troubleshooting

   |   

Illustrated Parts 

  |    

Removal & Replacement

Jumpers & Switches

   |   

Specifications

   |   

Connector Pins

    |   

Power Cord Requirements

Preparing for Disassembly 

To prepare the computer for the removal and replacement procedures, 

complete the following steps: 

1.  

Remove any diskette or compact disc (CD) from the computer.

2.  

Turn off the computer and any peripheral devices that are connected to the computer.

 

CAUTION:

 The computer power switch should be turned off 

before you disconnect any cables.

3.  

Disconnect the power cord from the electrical outlet then from the computer.

4.  

Disconnect all peripheral device cables from the computer.

IMPORTANT:

During disassembly, label each cable as you remove it. Be sure to note 

the position and routing of each cable before removal.

  

Back to Removal and Replacement 

  

 

 

privacy statement
legal notices

http://h18000.www1.hp.com/athome/support/msgs/3550/prep.html [12/9/2002 4:35:42 PM]

Summary of Contents for Presario 3500 Series





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands