Installing the Hardware
3-3
Compaq Confidential – Need to Know Required
Writer: Carmen Wheatcroft Project: Compaq PowerStorm 600 Graphics Controller Hardware Guide Comments:
Part Number: 120259-XX1 File Name: d-ch3 Installing the Hardware.doc Last Saved On: 2/19/99 9:01 AM
ML014886
Figure 3-1. Installing the Graphics Controller Modules
Completing the Installation
To complete the installation:
1.
Close the workstation.
2.
Connect the monitor video cable to the blue video output port on the
graphics rendering module of the PowerStorm 600 graphics controller.
If a workstation monitor has no built-in video cable, use a shielded video
cable with a 15-pin (D-sub) video connector at one end for the video output
port on the controller and the appropriate connectors at the other end for
the video input port on the workstation monitor.