Chapter
2
Installing the Upgrade Module and
Adapter
This chapter describes installation precautions, and procedures for attaching upgrade modules to
the adapter, and installing the adapter in a server. It also describes how to attach the network
cable and the loop-back plugs.
WARNING:
To avoid the risk of personal injury or damage to the equipment, consult the Safety
information and user documentation provided with your equipment before attempting the
installation.
Many servers are capable of producing energy levels that are considered hazardous. Users
should not remove enclosures nor should they bypass the interlocks provided for removal of
these hazardous conditions.
Installation of this adapter should be performed by individuals who are both qualified in the
servicing of computer equipment and trained in the hazards associated with products capable
of producing hazardous energy levels.
NOTE:
Before removing the cover of your server, refer to the Compaq documentation for the proper
method of installing a PCI card and safeguarding yourself from electrical shock hazards.
Electrostatic Discharge Precautions
A discharge of static electricity from a finger or other conductor can damage components on the
adapter. This can make the adapter inoperable. In addition to the following information, see
Appendix B for more precautions.
To prevent electrostatic damage, observe the following precautions:
Always properly ground yourself when touching a static-sensitive component or assembly.
■
■
■
■
■
Avoid hand contact by transporting and storing parts in static-safe containers.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free
locations.
Place parts on a grounded surface before removing them from their containers.
Avoid touching pins, leads, or circuitry.
