Compaq dx2810 - Microtower PC, Manual

Page: 10 / 12

SATA1 Controller
Mode If SATA1 Controller is enabled, allows you to set the mode to:
● IDE
●
RAID
● AHCI
Onboard Audio Allows you to set the onboard audio to:
●
Enabled
● Disabled
●
Auto
Onboard LAN Allows you to disable/enable onboard LAN controller.
Onboard LAN Boot
ROM Allows you to disable/enable the boot ROM of the onboard LAN chip.
USB Ports Allows you to disable/enable USB ports.
● Disabled
●
Enabled
Hood Sensor Allows you to disable/enable the hood sensor warning beep.
IO Device
Configuration Allows you to change the Super IO device resource.
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Power
Option Description
After AC Power Failure Allows you to select system restart behavior after power loss:
● Stay Off
●
Power On
● Auto
XD Disables/enables XD bit.
Virtualization
Technology Allows you to disable/enable Virtualization Technology.
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 4 Computer Setup—Boot
Option Description
Table 2 Computer Setup—Advanced (continued)
4 Computer Setup (F10) Utility ENWW